Webinars
Click on the button below to register for the next UTCRS webinar, to complete registration you will need to provide the following:
- First name (Required)
- Last name (Required)
- City (Required)
- State (Required)
- Organization [Choose the option that best applies to you] (Required)
- Job title (Optional)
After completing your registration you will receive an email with an invitation to the next webinar.
Register now!
Mitigating Train Derailments Through Proactive Condition Monitoring of Rolling Stock, March 7, 2025
Abstract:
The 2023 train derailment that occurred in East Palestine, OH, brought attention to the limitations of the detectors currently used in the industry. Typically, the health of train bearings is monitored intermittently through wayside temperature detection systems that can be as far as 40 miles apart. Nonetheless, catastrophic bearing failure is often sudden and develops rapidly. Current wayside detection systems are reactive in nature and depend on significant temperature increases above ambient. Thus, when these systems are triggered, train operators rarely have enough time to react before a derailment occurs, as it did in East Palestine, OH. Multiple comprehensive studies have shown that the temperature difference between healthy and faulty bearings is not statistically meaningful until the onset of catastrophic failure. Thus, temperature alone is an insufficient metric for health monitoring.
Over the past two decades, we have demonstrated vibration-based solutions for wireless onboard condition monitoring of train components to address this problem. Early stages of bearing failure are reliably detected via vibration signatures, which can also be used to determine the severity and location of failure. This is accomplished in three levels of analysis where Level 1 determines the bearing condition based on the vibration levels within the bearing as compared to a maximum vibration threshold for healthy bearings. In Level 2, the vibration signature is analyzed to identify the defective component within the bearing, and Level 3 estimates the size of the defect based on a developed correlation that relates the vibration levels to defect size.
We believe that vibration-based sensors can provide proactive monitoring of bearing conditions affording rail operators ample time to detect the onset of bearing failure and schedule non-disruptive maintenance. Our work aims to continue to optimize these new methods and help the rail industry deploy these technologies to advance rail safety and efficiency. Moreover, this research program has had an extraordinary transformative impact from the local to the national level by training hundreds of engineers from underrepresented backgrounds and positioning them for success in industry, government, and higher education.