Publications
Precision Machining:
- P. Zhang, R. Shivpuri, and A. K. Srivastava, “A New Microstructure-Sensitive Flow Stress Model for the High Speed Machining of Titanium Alloy Ti-6Al-4V”, Journal of Manufacturing Science and Engineering, vol. 139, May 2017, 051006: 1-17,
- Harish Kumar, Sehijpal Singh, and Anil Srivastava, “Parametric Investigations into Internal Surface Modification of Brass Tubes with Alternating Magnetic Field”, Procedia Manufacturing, Elsevier, Vol. 5, 2016, pp. 1234-1248
- Xueping Zhang, Rajiv Shivpuri, Anil K. Srivastava, “Chip Fracture Behavior in the High Speed Machining of Titanium Alloys”, Journal of Manufacturing Science and Engineering, vol. 138, August 2016, pp. 081001: 1-14,
- Srivastava and R. Pavel, “Grinding Investigations of Ti-6Al-4V Parts Produced using Direct Metal Laser Sintering (DMLS®) Technology”, International Journal of Mechatronics and Manufacturing Systems, vol. 8, Nos. 5/6, 2015, pp. 223-242,
- Zhang X. P., Shivpuri R., and Srivastava A. K., “Role of Phase Transformation in Chip Segmentation during High Speed Machining of Dual Phase Titanium Alloys”, Journal of Materials Processing Technology. Vol. 214 (12), 2014, pp. 3048-3066,
- Yamaguchi, A. K. Srivastava, M. Tan, and F. Hashimoto, “Magnetic Abrasive Finishing of Cutting Tools for High-Speed Machining of Titanium Alloys”, CIRP Journal of Manufacturing Science and Technology, vol. 7, 2014, pp. 299–304,
- Nath, S. G. Kapoor, A. K. Srivastava, J. Iverson, “Study of Droplet Spray Behavior of an Atomization-based Cutting Fluid (ACF) System for Machining Titanium Alloys”, Trans. of the ASME - Journal of Manufacturing Science and Engineering, 136(2), 2014, pp. 021004.
- P. Zhang, R. Shivpuri, A. K. Srivastava, “Role of Phase Transformation in Chip Segmentation during High Speed Machining of Dual Phase Titanium Alloys”, J. of Materials Processing Technology, 214 (12), 2014, pp. 3048–3066,
- Nath, S. G. Kapoor, A. K. Srivastava, J. Iverson, “Effect of Fluid Concentration in Titanium Machining with an Atomization-based Cutting Fluid (ACF) Spray System”, Journal of Manufacturing Processes, 15(4), 2013, pp. 419-425,
- Yingbin Hu, Jianzhi Li, “Selective Laser Alloying of Elemental Titanium and Boron Powder: Thermal Models and Experiment Verification” Journal of Materials Processing Technology, 249 (2017) 426–432
- Yingbin Hu, Jianzhi Li, “Ultra-short Laser Melting of Copper Nanoparticles: A Molecular Dynamics Study”, International Journal of Energy for a Clean Environment, 15(1) (2014) 1–25
- Jianzhi Li, “Selective laser alloying of pure Titanium and Boron powder: powder preparation, phase identification, and surface morphology” in submission
- Yangyang Long, Jianzhi Li, Douglas H. Timmer, Robert E. Jones, Miguel A. Gonzalez “Modeling and Optimization of the Molten Salt Cleaning Process”, Journal of Cleaner Production, 68 (2014) 243-251 (7)
- Zhenhua Wu, Sheng-Jen Hsieh, Jianzhi Li, “Sensor Deployment Based on Fuzzy Graph Considering Heterogeneity and Multiple-objectives to Diagnose Manufacturing System.” Robotics and Computer Integrated Manufacturing 29, pp. 192-208, 2013 (7)
- Jianzhi Li, Hong-Chao Zhang, “Asymmetric Negotiation Based Collaborative Product Design for Component Reuse in Disparate Products.” Computers & Industrial Engineering, 57 (2009) 80–90 (19)
- Jianzhi Li, Miguel González, and Yun Zhu, “A Hybrid Simulation Optimization Method for Production Planning of Dedicated Remanufacturing.” International Journal of Production Economics, 2009, Vol. 117, Issue 2, 286-301 (73)
- David Wu, Jianzhi Li, Douglas Timmer, Karen Lozano, and Subhash Bose, “Study of Processing Variables on the Electrical Resistivity of Conductive Adhesives”, International Journal of Adhesives and Adhesion, 29 (2009) 488–494. (72)